倍加福WE77/Ex2开关放大器,双通道,每个通道1个继电器触点输出(转换触点),Fuxb automation will serve you wholeheartedly! +86-021-51601058
Praise:
General specifications | ||
---|---|---|
Signal type | Digital Input | |
Supply | ||
Connection | terminals 17, 18 | |
Rated voltage | 198 ... 253 V AC ; 45 ... 65 Hz | |
Power dissipation | 2.5 W | |
Power consumption | approx. 3.2 VA | |
Input | ||
Connection side | field side | |
Connection | terminals 1-, 2+; 8+, 9- | |
Rated values | acc. to EN 60947-5-6 (NAMUR), see system description for electrical data | |
Open circuit voltage/short-circuit current | approx. 8 V DC / approx. 8 mA | |
Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA | |
Pulse/Pause ratio | min. 0.5 ms / min. 0.5 ms | |
Line fault detection | breakage I ≤ 0.1 mA | |
Output | ||
Connection side | control side | |
Connection | terminals 10, 11, 12; 13, 14, 15 | |
Output | signal ; relay | |
Contact loading | 253 V AC/2 A/500 VA/cos φ min. 0,7; 125 V AC/4 A/500 VA cos φ min. 0,7; 40 V DC/2 A/80 W ohmic load | |
Energized/De-energized delay | approx. 10 ms / approx. 20 ms | |
Mechanical life | 107 switching cycles | |
Transfer characteristics | ||
Switching frequency | < 10 Hz | |
Galvanic isolation | ||
Input/Output | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff | |
Input/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff | |
Output/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff | |
Indicators/settings | ||
Display elements | LEDs | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Low voltage | ||
Directive 2014/35/EU | EN 61010-1:2010 | |
Conformity | ||
Degree of protection | IEC 60529 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Connection | screw terminals | |
Mass | approx. 410 g | |
Dimensions | 60 x 104 x 110 mm (2.4 x 4.1 x 4.3 inch) | |
Data for application in connection with hazardous areas | ||
EU-Type Examination Certificate | PTB 02 ATEX 2065 | |
Marking | II (1)GD [EEx ia] IIC [circuit(s) in zone 0/1/2] | |
Input | Ex ia | |
Voltage | 13.4 V DC | |
Current | 31 mA | |
Power | 145 mW (trapezoid characteristic curve) | |
Supply | ||
Maximum safe voltage | 253 V AC (Attention! The rated voltage can be lower.) | |
Output | ||
Maximum safe voltage | 253 V AC (Attention! The rated voltage can be lower.) | |
Galvanic isolation | ||
Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
Directive conformity | ||
Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 | |
General information | ||
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. |